INSTRUCTION MANUAL

SWITCH CONTROL NORMAL READOUT:
1) A: E.L.BLACKLIGHT (ON THE UPPER LEFT CONNER)
2) B: MODE (ON THE LOWER LEFT CONNER)
3) C: FOR MONTH, DATE, DAY OF WEEK (ON THE UPPER RIGHT CONNER)
4) D: FOR ALARM TIME

SETTING SEQUENCE

A) NORMAL TIME SETTING
1) IN NORMAL TIME READOUT PRESS B 3 TIMES TO GET NORMAL TIME SETTING MODE.
2) PRESS D ONCE: "MIN" FLASHING, PRESS C TO ADVANCE.
3) PRESS D ONCE: "HOUR" FLASHING, PRES C TO ADVANCE. ("A" IS AM) ("P" IS PM) ('H" IS 24 HR. FORMAT)
4) PRESS D ONCE: "DATE" FLASHING, PRESS C TO ADVANCE.
5) PRESS D ONCE: "MONTH" FLASHING, PRESS C TO ADVANCE.
6) PRESS D ONCE: "DAY OF WEEK" FLASHING, PRESS C TO ADVANCE.
7) PRESS B ONCE: SETTING COMPLETED, RETURN TO NORMAL TIME READOUT.

B) ALARM TIME SETTING
1) IN NORMAL TIME READOUT PRESS B TWICE, ALARM TIME "HOUR" FLASHING, PRESS C TO ADVANCE.
2) PRESS D ONCE, ALARM TIME "MIN" FLASHING, PRESS C TO ADVANCE.
3) PRESS B ONCE, SETTING COMPLETED. RETURN TO NORMAL TIME READOUT.

C) ALARM FUNCTION
1) IN NORMAL TIME READOUT ALARM ARMED BY PRESS C AND D SIMULTANEOUSLY. ALARM SIGNAL WILL APPEARED.
2) IN NORMAL TIME READOUT DISARMED ALARM BY PRESS C AND D SIMULTANEOUSLY. ALARM SIGNAL WILL DISAPPEARED.
    THE ALARM WILL STOP ITSELF AFTER 1 MIN. OR CAN BE SILENCED BY PRESS D OR PRESS C WITH SNOOZE IN EACH 5 MIN.
    UNTIL NEXT HOUR.

D) CHIME
1) IN NORMAL TIME READOUT CHIME ACTIVATED BY PRESS D AND B SIMULTANEOUSLY, ALL DAY FLAG SHOWS UP.
2) IN NORMAL TIME READOUT INACTIVATED CHIME B PRESS D AND B SIMULTANEOUSLY, ALL DAY FLAG DISAPPEARED.

E) CHRONOGRAPH
1) IN NORMAL TIME READOUT PRESS B ONCE TO GET INTO "CHRONO" MODE. PRESS C CAN NOW BE OPERATED TO START
    OR ANY COUNTING EVENT.
    TWO OPTIONS FOR "CHRONO" MODE:
I) DURING COUNTING. PRESS C WILL STOP AND THEN PRESS D WILL RESET THE MARK
   OR
II) DURING A COUNTING. PRESS D WILL RETURN THE WATCH INTO LAP TIME MODE MEANING 1 PORTION OF THE COUNTING IS
   REGISTERED ON THE DISPLAY WHILE THE COUNTING CONTINUES UNTIL COMPLETED BY PRESS OF C THEN PRESS OF D TWICE.